Titan Complete Upper for Glock 19 Gen3, Lightening Cut 17-4 Stainless Steel Slide, 9mm Extended Barrel

$400.00

Titan Complete Upper for Glock 19 Gen3, Lightening Cut 17-4 Stainless Steel Slide, 9mm Extended Barrel

Complete Upper for Glock 19 Gen 3, 9mm Barrel.  For install on Glock 19 lower, Polymer80, or another compatible aftermarket. HGW exclusive Titan 17-4 Stainless Steel Slide complete upper. 100% made in the USA. Unique bead blasting media gives a warmer finish than the competition. Support an excellent veteran-owned company, working to be the absolute best. This is our top-of-the-line upper, starting with the most expensive slide and barrel blanks in the industry.
Always ask what’s in your Glock Upper, here’s our kit fully detailed:

HGW Titan Custom Lighening Cut Slide (made in the USA):

  • Gen 1-3 compatible, G19, 9mm
  • CNC Machined from U.S. 17-4 stainless steel
    • 17-4 steel is far more resilient to impact forces than 416ss, both are good, 17-4 is the best out there.
  • Fine Bead Blast Satin Finish
  • The highest level of attention to machining and finishing detail of all of our product lines
  • Heat Treated
  • Top Ports
  • Side cutouts, front serration cutouts
  • Slanted front and rear serrations
  • Custom “sculpted-design” nose, inspired by our shop’s love for classic cars and trucks.
  • Deep chamfered edge, fantastic for lightweight EDC builds
  • Excellent edge machining quality. Again, the finest out there.

Barrel (made in the USA):

  • Gen 1-3 compatible, G19, 9mm
  • CNC Machined from 416R Stainless Steel
    • Specific Rifle Grade for barrels
  • Extended length. Adds weight and is perfect for personalizing.
  • Heat Treated
  • Satin hood, polished length Stainless Steel Finish

Pre-installed HGW aftermarket internals (made in the USA):

  • Machined SS satin non-captive guide rod (Wolff Style) adds weight to the front end
    • Gen 1-3 compatible, G19, 9mm
    • CNC Machined from U.S. 416 stainless steel
    • Heat Treated
    • Round Wire Recoil Spring, 18 lb OEM weight
    • Take down hole which is an added bonus over the Wolff design

Pre-installed HGW OEM Style internals (made in the USA):

  • Striker / Firing Pin
  • Channel Liner
  • Striker Spacer Sleeve
  • Striker / Firing Pin Spring cups
  • Firing Pin Safety
  • Extractor
  • Extractor Depressor Plunger
  • Spring Load LCI Bearing
  • Internal Spring Kit
    • Striker, Extractor & FPS in Factory Weights
  • Backplate

You are purchasing a complete upper built by military veterans. All internal parts are included. Fitting may be required.  You will find the fit very similar to Zev and Zaffiri slides.
A fantastic deal on a complete match-grade package!





Add To Wishlist Compare
SKU: Titan Complete Upper for Glock 19 Gen3, Lightening Cut 17-4 Stainless Steel Slide, 9mm Extended Barrel Categories: , Tags: , ,

Description

Titan Complete Upper for Glock 19 Gen3, Lightening Cut 17-4 Stainless Steel Slide, 9mm Extended Barrel

Complete Upper for Glock 19 Gen 3, 9mm Barrel.  For install on Glock 19 lower, Polymer80, or another compatible aftermarket. HGW exclusive Titan 17-4 Stainless Steel Slide complete upper. 100% made in the USA. Unique bead blasting media gives a warmer finish than the competition. Support an excellent veteran-owned company, working to be the absolute best. This is our top-of-the-line upper, starting with the most expensive slide and barrel blanks in the industry.
Always ask what’s in your Glock Upper, here’s our kit fully detailed:

Titan Custom Lightning Cut Slide (made in the USA):

  • Gen 1-3 compatible, G19, 9mm
  • CNC Machined from U.S. 17-4 stainless steel
    • 17-4 steel is far more resilient to impact forces than 416ss, both are good, 17-4 is the best out there.
  • Fine Bead Blast Satin Finish
  • The highest level of attention to machining and finishing detail of all of our product lines
  • Heat Treated
  • Top Ports
  • Side cutouts, front serration cutouts
  • Slanted front and rear serrations
  • Custom “sculpted-design” nose, inspired by our shop’s love for classic cars and trucks.
  • Deep chamfered edge, fantastic for lightweight EDC builds
  • Excellent edge machining quality. Again, the finest out there.

Barrel (made in the USA):

  • Gen 1-3 compatible, G19, 9mm
  • CNC Machined from 416R Stainless Steel
    • Specific Rifle Grade for barrels
  • Extended length. Adds weight and is perfect for personalizing.
  • Heat Treated
  • Satin hood, polished length Stainless Steel Finish

Pre-installed HGW aftermarket internals (made in the USA):

  • Machined SS satin non-captive guide rod (Wolff Style) adds weight to the front end
    • Gen 1-3 compatible, G19, 9mm
    • CNC Machined from U.S. 416 stainless steel
    • Heat Treated
    • Round Wire Recoil Spring, 18 lb OEM weight
    • Take down hole which is an added bonus over the Wolff design

Pre-installed HGW OEM Style internals (made in the USA):

  • Striker / Firing Pin
  • Channel Liner
  • Striker Spacer Sleeve
  • Striker / Firing Pin Spring cups
  • Firing Pin Safety
  • Extractor
  • Extractor Depressor Plunger
  • Spring Load LCI Bearing
  • Internal Spring Kit
    • Striker, Extractor & FPS in Factory Weights
  • Backplate

You are purchasing a complete upper built by military veterans. All internal parts are included. Fitting may be required.  You will find the fit very similar to Zev and Zaffiri slides.
A fantastic deal on a complete match-grade package!

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Cart
Your cart is currently empty.
X